Manually create / flash Clockworkmod to a Tecno phone MTK Device

How to manually create / flash Clockworkmod to a Tecno phone

If you're unable to flash Clockworkmod to your Tecno phone for any reason then here's a guide on how to manually flash it with eas. Follow the simpe steps below,

* Note that the procedure is the same for MTK based Android phones.

Requirements

1. Download MTK droid tools
2. Download PdaNet
3. A PC
4. USB cord
5. The rooted phone

Read:

Clockworkmod (CWM) For Tecno Phones

Procedure

1. Enable USB debugging on the phone and connect it to the PC
2. With the phone connected, install PdaNet (Select Other from the list ; you should see "Drivers Successfully Installed" at the end of installation) .
3. Launch MTK Droid tools
4. MTK Droid tools should display the phone's details by the left
5. The box at the bottom should be yellow
6. Click Root at the bottom of MTK and select Yes if prompted on PC and Grant on phone
7. A green bar should load and the yellow box should become green
8. Click on the root,backup,recovery tab at the top
9. Click Backup and wait for the backup process to be complete
10. When promoted to pack backup, select No.
11. When backup is complete, tick 'To select boot.img'
12. In the window that pops up, select the boot file from the backup you just made (MTK folder > Backups > Phone backup)
13. Click Yes to every prompt you get
14. When promoted to boot into recovery mode, click Yes
15. The phone should now boot into clockworkmod recovery mode
16. Ensure to backup your phone (Backup and Restore > Backup )

If you like have any questions to ask Feel Free to use the Comment Box to share your Thoughts. Don't forget just like and share.